Download Google Camera [GCam] APK For Redmi Note 9 Pro

0
43


Google Camera Port is finally available for Redmi Note 9 Pro. If you want to experience the best image quality from your device, then you should download and install Google Camera APK For Redmi Note 9 Pro.

Xiaomi’s stock camera app is very good but when you compare it to the Google camera app, it lacks some great AI features

The Redmi Note 9 Pro comes with 6.67-inch IPS LCDdisplay. It is powered by Qualcomm SM7125 Snapdragon 720G SoC clocked at 2.3 GHz and comes with 6 GB of RAM with 128 GB of internal storage which can be expanded up to 512 GB with micro SD card. It runs on MIUI based on Android 10 out of the box. It is juiced by a 5020 mAh. In the camera department, the Redmi Note 9 Pro packs in 4 sensors at back of which 48 MP sensor that is combined with a f/1.8 lens is main. On the front, there is a 16 MP sensor.

Though the phones pack in some decent camera hardware, the software processing is not up to the mark to rival. For three years in a row, Google proved that with better software processing algorithms, their phones with a single rear camera can outperform phones with multiple cameras on the rear. If you happen to own a Redmi Note 9 Pro and want a similar level of image processing, here is how you can achieve that.

Google Camera Port For Redmi Note 9 Pro

XDA Developers have managed to bring Google Camera from the Google Pixel devices with the HDR+ algorithm and other Google Camera enhancements to Redmi Note 9 Pro. The ports pack in the following features:

  • Portrait Mode
  • Photosphere
  • HDR+ Mode
  • Lens Blur
  • Google Lens
  • Panorama
  • Video Capture

Download Google Camera APK For Redmi Note 9 Pro

Download the latest version of Google Camera port for Redmi Note 9 Pro by clicking below:

Google Camera VersionFile NameDownload Link
Gcam v7.3GCam_7.3.018_Urnyx05-v1.6.apkDownload

Steps To Install Google Camera on Redmi Note 9 Pro

  1. Download the Google Camera APK file.
  2. Copy/Move the downloaded file to your phone.
  3. Open a file manager of your choice and navigate to the copied file.
  4. Tap on the file to install it as normal APK.

And you are done.

No root or any special steps needed. Once you install the app, you can simply open the app, grant the required permissions and start using it.

Recommended Settings

These APKs don’t require any additional configuration, but, on top of the usual options (camera sounds, video resolution, etc) there are a few things you can change (explore the settings menu!):

  • HDR+ parameters: “Default” is enough for most people. Higher settings may produce better photos, especially in hard conditions, but it takes more time to process.
  • HDR+ image quality: Change the jpg compression (a lower value results in smaller files, but the quality is worse).
  • HDR+ RAW+JPG: Save RAW files.
  • Correction of auto-exposure HDR or Auto-Exposure: Controls shutter speed, not 100% stable. Works better in low light and with HDR enhanced enabled.
  • HDR+ enhanced for portrait mode: Slower, but better portrait photos.
  • Disable zoom in portrait mode: By default, it zooms in a bit.
  • Use Nexus6P model: Photos with better details/sharpness (and noisier).
  • Enable Astrophotography : Go to Advanced settings, then scroll down almost to the end and enable Astrophotography.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.